Keep in mind:
Upon obtaining the item, it's suggested to completely charge the system before using it.
Fee battery at the very least as soon as every 3 months to avoid reducing its life-span.
Press the on/off switch for over 3 seconds to activate the flashlight.
The 12v port only works for vehicle application. It will not work for cams or other little electronic gadgets.
Batter Type: Li-Polymer
Input: DC 12V 1A
Output: 5V/2 。 4A( 2 Ports).
Car dive Output: 12V.
Beginning Current ： 250A.
Optimal Current ： 500A.
Relevant temperature variety: 0 ℃ ~ 85 ℃.
Don't leap begin any type of engine that go beyond the optimum displacement the system can birth, or it will create serous damages to the device.
Your dive starter will perform best when its battery is completely charged.
Don't link the favorable as well as unfavorable polarity with each other when it's power on.
Do not crank the engine for more than 4 secs. Enable the jumpstarter to cool down for at least 30 seconds after each jump-start.
1 x 12000mAh Nekteck Car Jump Starter.
1 x Car Charger.
1 x Micro USB Cable.
1 x Jumper Cable with Battery Clamps.
1 x User Manual.
1 x Portable Carrying bag.